Operations and Maintenance Manual

ManualsBrandsKAPSCH TRAFFICCOM CANADA ManualsElectronicsNon-multilateration LMS transmitter and receiver

241

242

243

244

245

246

247

248

249

250

JANUS

Multi-Protocol Reader Ver. 2: Maintenance Instructions

Confidential UM 360463-202: A12 (Draft) Page 246 of 291

These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict

confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or

used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.

FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24

Kapsch TrafficCom

If using Firefox:

1. Select Save File. Note the configuration filename () that is automatically generated.

2. Click OK.

Result: The configuration file will be saved as a text file in the default Firefox download location.

Uploading a saved configuration

Uploading a saved configuration will overwrite the current Reader configuration. There are two options

for uploading a saved configuration: updating all configuration settings except for the IP settings, or

updating all configuration settings including the IP settings. All callouts refer to Figure 7-4.

Prerequisites: A service laptop connected to Ethernet 1 or a USB port of the CTM and accessing the

CTM web interface.Refer to Connecting a service laptop to the Reader, page 40. A version of the

configuration file to be loaded is saved on a service laptop connected to the Reader.

CAUTION:

Improper modification of configuration parameters may adversely

affect system operation. The default values may not be appropriate

for the specific application. It is the system integrator’s responsibility

to tailor the configuration parameters to the specific operating

environment.

1. From the Manage Config tab on the Configuration page, click the Browse button () to locate the

configuration file on the service laptop to be uploaded.

2. If uploading all configuration settings to the Reader without changing the IP addresses settings, click the

first Upload Config button ().

3. If uploading all configuration settings to the Reader, including the IP addresses, click the second Upload

Config button ().