Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Maintenance Instructions
Confidential UM 360463-202: A12 (Draft) Page 249 of 291
© Kapsch TrafficCom Canada Inc. 2013
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict
confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or
used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24
Kapsch TrafficCom
3. Click the Reset Parameters to Default Values button.
Result: All configuration values, except for the Reader IP addresses, will change to the factory defaults.
Administration
User administration permissions are needed when a new user account needs to be created, when an
account needs to be changed, or deleted. The user can be given access to any combination of the five
following access areas.
 User
 Advanced user
 Software management
 User admin
 Manage log files
Creating a new user
This procedure outlines how to create a new user account, create a password, and set the user
permissions.
Prerequisites: A service laptop connected to either the Ethernet 1 or a USB port of the CTM. Refer to
Connecting a service laptop to the Reader, page 40. You must have User Admin permissions.
1. Click on the Manage Users link on the left side panel
Result: The following screen appears.
2. A Create New User form will appear on the User Management tab.
3. Click the Create New User button.
Result: The following screen appears.