Operations and Maintenance Manual

ManualsBrandsKAPSCH TRAFFICCOM CANADA ManualsElectronicsNon-multilateration LMS transmitter and receiver

241

242

243

244

245

246

247

248

249

250

JANUS

Multi-Protocol Reader Ver. 2: Maintenance Instructions

Confidential UM 360463-202: A12 (Draft) Page 250 of 291

These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict

confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or

used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.

FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24

Kapsch TrafficCom

4. Enter a unique user name in the User Name text box.

5. Enter the new user’s password in the Password and Confirm Password text boxes.

6. Select Enabled for any of the five access areas to give the user the appropriate permissions.

7. Click Submit to create the new user account and return to the User Management tab.

Note: If you decide not to create the user at this time, click Cancel to return to the User Management tab

Changing a user’s access permissions

A user’s access permissions are set when the user account is created. As a user’s responsibilities

change, they may need access to more or fewer areas of the Reader configuration. This procedure

outlines how to change the access permissions of an existing user.

Prerequisites: A service laptop connected to Ethernet 1 or a USB port of the CTM. Refer to Connecting

a service laptop to the Reader, page 40. You must have User Admin permissions.

1. Click on the Manage Users link on the left side panel

Result: The following screen appears.