Operations and Maintenance Manual

ManualsBrandsKAPSCH TRAFFICCOM CANADA ManualsElectronicsNon-multilateration LMS transmitter and receiver

251

252

253

254

255

256

257

258

259

260

JANUS

Multi-Protocol Reader Ver. 2: Maintenance Instructions

Confidential UM 360463-202: A12 (Draft) Page 252 of 291

These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict

confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or

used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.

FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24

Kapsch TrafficCom

5. Click Yes to confirm.

Result: The user access permissions update.

Deleting a user

Note: A deleted user will no longer be able to access the CTM web interface.

Prerequisites: A service laptop connected to Ethernet 1 or a USB port of the CTM. Refer to

Connecting a service laptop to the Reader, page 40. You must have User Admin permissions.

1. Click on the Manage Users link on the left side panel.

Result: The following screen appears.

2. Click the corresponding Delete button.

Result: A dialog box appears for delete confirmation.

3. Click Yes to confirm.

Verifying a computer is communicating with a specific CTM

Note: This test verifies the CTM that is being communicated with while using the web interface.

Prerequisites: A service laptop connected to Ethernet 1 or a USB port of the CTM and accessing the

CTM web interface. Refer to Connecting a service laptop to the Reader, page 40.

1. Click on the Configuration link on the left side panel of the CTM web Interface.

Result: The following Configuration page appears.