Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Maintenance Instructions
Confidential UM 360463-202: A12 (Draft) Page 255 of 291
© Kapsch TrafficCom Canada Inc. 2013
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict
confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or
used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24
Kapsch TrafficCom
Result: The following screen appears.
7. From the Time Management screen, select Enable to enable the Reader time updates from an NTP server.
8. Enter the three unique IP addresses recorded in step 4 in the NTP Server 1, 2 and 3 text boxes.
9. Select the appropriate time zone from the Time Zone drop-down box. This is for display purposes only.
10. Click the Update NTP Setting button.
Result: The first available NTP server updates the Reader time.
Manually setting the Reader time and date
The Reader time can be set manually when it is not part of an Inter-Reader network. This procedure
outlines how to set manually the Reader time.
Prerequisites: A service laptop connected to Ethernet 1 or a USB port of the CTM and accessing the
CTM web interface. Refer to Connecting a service laptop to the Reader, page 40.
1. Click the Set Time link on the left side of the panel.
Result: The following screen appears.