Operations and Maintenance Manual

ManualsBrandsKAPSCH TRAFFICCOM CANADA ManualsElectronicsNon-multilateration LMS transmitter and receiver

261

262

263

264

265

266

267

268

269

270

JANUS

Multi-Protocol Reader Ver. 2: Appendix

Confidential UM 360463-202: A12 (Draft) Page 261 of 291

These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict

confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or

used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.

FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24

Kapsch TrafficCom

Using RealTerm to connect to the MRFM-S

1. Connect a serial cable from the MRFM LC COM port to a port on your computer.

2. Launch RealTerm.

3. From the Port tab, select 115200 from the Bits per second drop-down box,set Data Bits to 8, set Parity

to None, Stop Bits to 1, Flow Control to None.

Example: The following example is shown.

4. Select the COM port number of the computer port you connected to in Step 1 from the Port drop-down

box.

5. Click the  Change button.

6. From the Display tab, select Binary from the Display As column.

7. MRFM-S data now displays in the display pane in the upper half of the RealTerm window.