Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Appendix
Confidential UM 360463-202: A12 (Draft) Page 287 of 291
© Kapsch TrafficCom Canada Inc. 2013
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict
confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or
used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24
Kapsch TrafficCom
Feature
JANUS
Badger
Notes
Remote reset (reboot)
Y
reset via a lane controller or the web
interface
Firmware download
Y
Maintain multiple firmware images
Y
At least 6 versions, including factory
image.
Automatic switchover recovery
Y
Reader will return control to Primary
without operator intervention.
USB stick transaction logging
Y
Diagnostics
Diagnostic Port
Y
Y
Test Tag Support
Y
Y
Load monitoring (CPU/Mem)
Y
Allows anomaly detection.
High Speed Margin Diagnostic
Y
Proof of concept for channels with
MRFM-S.
Trouble Log
Y
Separate trouble items from transaction
log
Transaction Log
Y
Temporary transaction log
Event log
Y
Y
JANUS: number of events limited only by
CF partition size. BGR & IAG: 10 events
Lane Controller serial interface check
Y
Via a loop-back adapter
Self-Test issued by Lane Controller
Y
LC commands a Reader to initiate/report
self-test.
Controller (CGC) serial number reported
Y
S/N of controller board is sent to Web IF
and log
Other
Network Time Protocol
Y
Allows NTP to sync date and time for all
Readers in a network
Feedback OBU activation – Option 1
Y
Y
BGR205 firmware
Dual Reporting Mode (Redundancy
Reporting)
Y
Improved processing redundancy
handling (JANUS
®
Reader Phase 2).