Operations and Maintenance Manual

ManualsBrandsKAPSCH TRAFFICCOM CANADA ManualsElectronicsNon-multilateration LMS transmitter and receiver

JANUS

Multi-Protocol Reader Ver. 2: Operating Instructions

Confidential UM 360463-202 Revision: A12 (Draft) Page 35 of 291

These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict

confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or

used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.

FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24

Kapsch TrafficCom

Lane Port Module (LPM)

Function

Provides a serial interface between the LCs and

CTM. All OBU Data processing is done by the CTM.

Units per

Redundant

Reader

One LPM on primary side,

One LPM on secondary side

Normal State

N/A (no status indicators on module)

Connections

The Reader can send real-time OBU transactions to

the LCs via the eight serial ports on the LPM. The

LC can also update the Reader configuration via

these ports.

