Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360463-202 Revision: A12 (Draft) Page 52 of 291
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict
confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or
used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24
Kapsch TrafficCom
Table 3-4: Miscellaneous Information fields
Miscellaneous Information tab
Field
Status
Description
LC Serial Type
Defined
LC Serial Type is known
Undefined
LC Serial Type is unknown
CTM Position
Primary
The CTM is installed on the primary side
Secondary
The CTM is installed on the secondary
side
Active State
Active
CTM is active
InActive
CTM is not active
CGC Health
Status
Operational
CGC2 is operational
Down
CGC2 Failure
Board
Example:
LB800, LB735
Provides information on the model of
the single board computer (SBC) board
installed Type of Board installed
Other Side
Config
Compare
Communication
Down; Same;
Different
(BETA) Provides an indication as to
configuration state of peer CTM
Communication Down (peer CTM is not
running so configuration state is
unknown)
Same (peer CTM configuration is
identical to this CTM’s configuration)
Different (peer CTM configuration is
different that this CTM’s
configuration)
Front-panel
switch
position
Auto; Primary;
Secondary
Auto, Primary (switch set to Primary
side), Secondary (switch set to
Secondary side).
For a redundant system, the switch
would normally be set to Auto
CFM Status
Present
Indicates normal status
Not Detected
Indicates a problem; call Kapsch Service
Lane Tuning
Mode
Disabled
‘Disabled’ is normal status
Super Frame
Time (μs)
Numerical read
Reader timing information In
microseconds