Operations and Maintenance Manual

ManualsBrandsKAPSCH TRAFFICCOM CANADA ManualsElectronicsNon-multilateration LMS transmitter and receiver

JANUS

Multi-Protocol Reader Ver. 2: Operating Instructions

Confidential UM 360463-202 Revision: A12 (Draft) Page 58 of 291

These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict

confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or

used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.

FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24

Kapsch TrafficCom

Note: Each side reports transactions that occurred while being active.

Monitoring OBU transactions as they occur via the Diagnostics page

Monitoring OBU transactions from the Diagnostics page is a better alternative to viewing transactions

from a transaction log on the Log Files page because the transactions on the Diagnostics page are

updated automatically. However, transactions that occurred before the Diagnostics page was

accessed can only be viewed from the transaction log.

The Display Transactions option displays both active and passive transactions.

Prerequisites: Connect the service laptop to the Reader configuration port to access the CTM web

Refer to Connecting a service laptop to the Reader, page 40. You must have Advanced User

permissions.

Note: The computer must have Java version 6.0 installed (see www.java.com).

1. Select the Diagnostics link from the left side panel.

Result: The following Diagnostics Page appears.