Operations and Maintenance Manual

ManualsBrandsKAPSCH TRAFFICCOM CANADA ManualsElectronicsNon-multilateration LMS transmitter and receiver

JANUS

Multi-Protocol Reader Ver. 2: Operating Instructions

Confidential UM 360463-202 Revision: A12 (Draft) Page 65 of 291

These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict

confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or

used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.

FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24

Kapsch TrafficCom

Configuring OBU programming for Traffic Management Applications

1. From the Tag Programming screen, select the Enable TMP check box.

Result: The following screen appears.

4. Select the Reader ID check box to enable writing the Reader ID to OBUs.

5. Enter a unique Reader ID.

6. Select the TM Date/Time check box to write the Reader TM time to OBUs.

7. Press Enter to accept the selections.

Configuring OBU programming for Toll Collection applications

1. From the above Tag Programming screen, select the Enable TCP check box.

Result: The following screen appears.