Operations and Maintenance Manual

ManualsBrandsKAPSCH TRAFFICCOM CANADA ManualsElectronicsNon-multilateration LMS transmitter and receiver

JANUS

Multi-Protocol Reader Ver. 2: Operating Instructions

Confidential UM 360463-202 Revision: A12 (Draft) Page 67 of 291

These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict

confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or

used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.

FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24

Kapsch TrafficCom

5. Select the desired transaction numbering calculation from the drop-down box.

6. Select the TC Date/Time check box to write the transaction time to the OBU.

7. Select the RW Format check box to determine how the scratchpad data is encoded when written to

OBUs.

8. Select the OBU Feedback check box to enable OBU feedback, ensuring that you first enabled and

configured the Plaza ID in step 7 on page 66.

9. Assign a Lane Number to each RF channel. When a transaction occurs between an OBU and a channel,

the Lane Number specified here will be used when recording the transaction in OBU memory.

10. Select the OBU Feedback tab.

11. Select either Type 1 or Type 2 feedback.

12. Select the desired audible feedback to control OBU beeping when a transaction occurs.

13. Select the desired visual feedback to control OBU LED flashing when a transaction occurs.

14. Press Enter to accept selections.

Configuring Toll charges

The Reader can deduct toll charges from a toll/balance OBU based on a number of parameters. BAT 1

tolling deducts charges based on the vehicle type and the lane the vehicle is in when it passes through

the toll plaza. BAT 2 tolling deducts charges based on distance by determining the toll plazas the

vehicle entered and exited on the highway.

Prerequisites: You must have Advanced User permissions.