Operations and Maintenance Manual

ManualsBrandsKAPSCH TRAFFICCOM CANADA ManualsElectronicsNon-multilateration LMS transmitter and receiver

JANUS

Multi-Protocol Reader Ver. 2: Operating Instructions

Confidential UM 360463-202 Revision: A12 (Draft) Page 69 of 291

These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict

confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or

used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.

FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24

Kapsch TrafficCom

4. Select one of four Toll Rate Tables for each channel, which determines the charge for the lane associated

with each channel.

5. Select the Enforce Adjustment ID Checking check box to limit how frequently the balance can be

updated.

6. Press Enter to accept the values.

Result: The Reader now charges OBUs based on your choices.

BAT 2 tolling (deducting charges based on entry and exit location)

1. Select the Configuration link on the left side panel of the screen.

Result: The following screen appears.

2. Select the Toll Rate/Balance tab

3. Select BAT 2 - Variable Toll as the TRBA BAT Processing Type.

Result: The following screen appears.