Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360463-202: A12 (Draft) Page 73 of 291
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Statistics
In the navigation side bar:
Click Statistics.
anyone
N/A
N/A
N/A
displays the Statistics
page in the CTM web
interface.
Used to view
Reports by
channel ,
Low/Early Reads,
Transaction
Buffering
statistics.
Note: The Reset
Transaction
Statistics button
is used to start a
new statistical
record.
Configuration
In the navigation side bar:
Click Configuration.
anyone
N/A
N/A
N/A
displays the Configuration
page in the CTM web
interface.
Used to access a
variety of Reader
configuration
parameters.
Manage
Software
In the navigation side bar:
Click Manage Software
user with
Manage
Software
permissions
N/A
N/A
N/A
displays the Software
Management page in the
CTM web interface.
Used to access
upload and
verify, activate,
and delete
software
commands and
the Reboot
button to reboot
the Reader.