Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360463-202: A12 (Draft) Page 78 of 291
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Reader IP
address
From the General tab on the
Configuration page:
Type a Reader IP address in
Reader IP Address field in
General tab of the
Configuration page, then, ,
click outside the field, press
Enter, or select a different tab.
user with
Advanced
User
permissions
READIP
10.0.0.50.0
N/A
sets the IP address for the
Reader
Used to specify a
unique IP
address for the
Reader when
configuring an IR
network
USB Adapter IP
or Bluetooth IP
Address
From the General tab on the
Configuration page:
Type an IP address in the USB
Adapter IP Address field, then,
, click outside the field, press
Enter, or select a different tab.
user with
Advanced
User
permissions
USB_IP
192.168.2.50
N/A
sets the IP address for the
USB-to-Ethernet adapter
connected to one of the
CTM USB ports
Used to specify a
unique IP
address for the
USB-to-Ethernet
adapter for
connecting a
service laptop
computer to a
CTM USB port