Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360463-202: A12 (Draft) Page 79 of 291
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Default
Gateway IP
From the General tab on the
Configuration page:
Type an IP address in the
Default Gateway IP Address
field, then, , click outside the
field, press Enter, or select a
different tab.
anyone
DFGWIP
0.0.0.0.0
N/A
tells the Reader the
default gateway IP
address of the gateway
device
Used to allow
the Reader on a
network to
connect to a
larger network
(such as the
Internet) via a
gateway device
(such as a
router)
Suppress Non-
IAG Tags
From the General tab on the
Configuration page:
Select Suppress Non-IAG Tags
check box, then, , click outside
the field, press Enter, or select
a different tab.
anyone
NONIAG
1 (Enabled)
0 (Disabled)
1 (Enabled)
Disabled: All transactions
are reported
Enabled: suppresses
reporting of OBUs not
matching the Group ID
that the Reader is
provisioned
Used to prevent
incompatible
report formats
from being sent
to the LC