Operations and Maintenance Manual

ManualsBrandsKAPSCH TRAFFICCOM CANADA ManualsElectronicsNon-multilateration LMS transmitter and receiver

JANUS

Multi-Protocol Reader Ver. 2: Operating Instructions

Confidential UM 360463-202: A12 (Draft) Page 81 of 291

These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose

intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.

FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24

Kapsch TrafficCom

Command

How is this command

executed?

Who can

execute this

command?

Parameter

Name

Default

Parameter

Value

Parameter

Range/Options

What does this

command do?

What is the

purpose of this

command?

Superframe

Sync Skip

From the General tab on the

Configuration page:

Select either Sync to

superframe or Sync to every

other superframe, then, , click

outside the field, press Enter,

or select a different tab.

user with

Advanced

User

permissions

RFSKSK

0 (Sync to

every

superframe

enabled)

0 (Sync to

every

superframe)

1 (Sync to

every other

superframe)

specifies whether the

Reader tries to sync every

superframe or every other

superframe

Used to allow

Readers with

different

superframe sizes

to sync after the

same number of

frames

Add 2 Dummy

Frames

From the General tab on the

Configuration page:

Select either No or Yes, then, ,

click outside the field, press

Enter, or select a different tab.

user with

Advanced

User

permissions

RFADD2

0 (No)

1 (Yes)

No: dummy frames are

not added to superframe

Yes: dummy frames are

added to superframe.

Used to allow

Readers with

different

superframe sizes

to sync after the

same number of

frames

Type Of Reader

Syncing To

From the General tab on the

Configuration page:

Select either JANUS or Badger

from the drop-down box, then,

click outside the field, press

Enter, or select a different tab.

anyone

SYNCTO

0 (JANUS)

1 (Badger)

JANUS: normal frame rate

is used for

synchronization

Badger: Reader

synchronization is

adjusted to Badger frame

rate

Used to cause

JANUS

Readers

to adjust to the

same frame rate

as BADGER

Readers