Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360463-202: A12 (Draft) Page 86 of 291
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Dual Reporting
Mode
From the General tab on the
Configuration page:
Select the Dual Reporting
Mode check box, then, , click
outside the field, press Enter,
or select a different tab.
user with
Advanced
User
permissions
DUALRP
0 (Dual
Reporting
Mode
disabled)
0 (Dual
Reporting
Mode
disabled)
1 (Dual
Reporting
Mode
enabled)
sets Reader to Dual
Reporting mode
Used to gather
reports from
both the primary
and secondary
sides of the
Reader
Auto Recovery
To Prime
From the General tab on the
Configuration page:
Select the Auto Recovery To
Prime check box, then, ., click
outside the field, press Enter,
or select a different tab.
user with
Advanced
User
permissions
A_RCVR
1 (Auto
Recovery to
Prime
Enabled)
0 (Disabled)
1 (Enabled)
Disabled: Reader does not
attempt to recover to
Primary side when failure
clears.
Enabled: Reader
automatically attempts to
recover to Primary side
when a Primary failure
clears.
to enable the
Reader to
automatically
switch back to
the primary side
once a primary
side failure has
cleared