Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360463-202: A12 (Draft) Page 88 of 291
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Switchover on
Ethernet IRIF
Link Down
From the General tab on the
Configuration page:
With Ethernet LC
communications enabled,
select the Switchover on
Ethernet IRIF Link Down check
box, then, click outside the
field, press Enter, or select a
different tab.
user with
Advanced
User
permissions
SOIRIF
0
0-1
Disabled: switchover does
not occur when the
Ethernet IRIF link is down.
Enabled: Enable means
switch-over if a
connection to an adjacent
reader over the Ethernet
interface is down.
N/A