Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360463-202: A12 (Draft) Page 91 of 291
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Cross-Reader
Reporting
From the Lane Assignment tab
on the Configuration page,
with Badger-style CRA or
Ethernet communication
method enabled:
Select Disabled, Report All, or
Report Non-Zero from the
Cross-Reader Reporting drop-
down box, then, press Enter or
select a different tab.
user with
Advanced
User
permissions
CRARPT
0 (Disabled)
0 (Disabled)
1 (Report All)
2 (Report Non-
Zero)
Disabled: Reader is not
set to communicate with
other Readers.
Report All results in all
transactions being sent to
the LC
Report Non-Zero informs
the LC of suppressed
transactions
to set which
transactions are
sent to LC in
multi-reader
configurations
IRIF Timeout
[ms]
(make sure the
TTO values of
all IRIF readers
are the same)
From the Lane Assignment tab
on the Configuration page,
with Ethernet communication
method enabled:
Enter a time, in milliseconds, in
the IRIF Timeout field, then,
press Enter or select a different
tab.
user with
Advanced
User
permissions
IRIFTO
50
30-5000
sets IRIF timeout time
sets the
threshold for
determining an
IR network
problem and
enable a
switchover if
enabled