Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360463-202: A12 (Draft) Page 96 of 291
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Agency ID
From the Tag Programming tab
on the Configuration page:
With Agency ID enabled, enter
a numeric Agency ID, then,
press Enter or select a different
tab.
anyone
AID___
0
0 - 127
sets the agency ID
to keep a record
in OBUs of the
agency ID
Transaction
number
programming
(enable)
From the Tag Programming tab
on the Configuration page:
With TCP enabled, select the
Transaction number
programming check box.
anyone
N/A
N/A
N/A
enables a transaction
number to be written to
the OBU
to write a
transaction
number to OBUs
and to access the
transaction
number
programming
options