Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360463-202: A12 (Draft) Page 97 of 291
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Transaction
number
programming
From the Tag Programming tab
on the Configuration page:
With Transaction number
programming enabled, select
the appropriate calculation
type from the Transaction
number programming drop-
down box, then, press Enter or
select a different tab.
anyone
TFRM__
2 Reprogram
with 16 bit
sequential
transaction
number
0 Don’t
reprogram
transaction
field
1 Reprogram
with 16 bit
random
number
2 Reprogram
with 16 bit
sequential
transaction
number
3 Reprogram
with 8 bit
random
number and
8 bit
sequential
number
sets the way the Reader
creates an OBU
transaction number
to choose how
the Reader
determines OBU
transaction
numbers