Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360463-202: A12 (Draft) Page 98 of 291
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
OBU Feedback
From the Tag Programming tab
on the Configuration page:
Select the OBU feedback check
box.
Note: If the checkbox is grayed
out, it is because the Toll
Rate/Balance Adjustment is
checked. Uncheck this
checkbox to activate the OBU
feedback checkbox
anyone
rw_OBU
0 (Disabled)
0 (Disabled)
1 (Enabled)
Disabled: programs
feedback-type OBUs to
not provide feedback
Enabled: programs
feedback-type OBUs to
provide feedback
to configure
feedback-type
OBUs to notify
when an ETC
transaction has
occurred.
Toll Rate /
Balance
Adjustment
From the Tag Programming tab
on the Configuration page:
Select the Toll Rate / Balance
Adjustment check box.
Note: If the checkbox is
grayedout, it is because the
OBU feedback checkbox is
checked. Uncheck this
checkbox to activate the Toll
Rate/Balance Adjustment
checkbox.
anyone
rw_TRB
0 (Disabled)
0 (Disabled)
1 (Enabled)
Disabled: blanks out the
Toll Rate / Balance
Adjustment tab.
Enabled: Reader is
responsible for adjusting
Toll Rate and Balance in
OBU.
to allow the
Toll/Rate
Balance
adjustment to be
made by the
Reader and
access
configuration
settings.