Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210 Revision C Page 100 of 288
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Interpolated
Handshake
Equalization Ratio
(%)
From the Lane
Assignment tab on the
Configuration page:
Select Interpolated
from the Lane
Assignment Algorithm
box. When Interpolated
Handshake Equalization
Ratio (%) field appears,
enter a value in the
field.
user with
Advanced
User
permissions
HSEQUR
25
1-100
Assigns a numerical value
to the Handshake
equalization ratio field
used in interpolated
voting
used in
interpolated
voting
Communication
Method
From the Lane
Assignment tab on the
Configuration page:
Select Disabled,
Badger-style CRA, or
Ethernet from
Communication Method
drop-down box.
user with
Advanced
User
permissions
MULTRD
Disabled
Disabled
Badger-Style
CRA
Ethernet
Disabled: Reader is not
set to communicate with
other Readers.
Badger-Style CRA: Voting
between Readers relies on
vote counts.
Ethernet: Voting between
Readers relies on
algorithms.
sets how
Readers
communicate
when
determining lane
assignments
between
multiple Readers