Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210 Revision C Page 104 of 288
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Tag Programming tab
Lane Number
(channel
assignment)
From the Tag
Programming tab on
the Configuration page:
With Lane Number R/W
enabled, enter a value
from 0 to 31 in each
channel number field.
anyone
RFLNUM
Per-instance
defaults.
Instance:0
value:1
instance:1
value:2
.
.
.
instance:30
value:31
0-31
assigns a lane number to
each channel.
ATTENTION: this field
should be used with care
as the value may not
reflect the channel on
which the tag was
reported.
to indicate in
OBU data which
lane an OBU was
in when a
transaction
occurred
Plaza ID
From the Tag
Programming tab on
the Configuration page:
With Plaza ID enabled,
enter a numeric Plaza
ID.
anyone
PID___
0
0-127
sets Plaza ID
to keep a record
in OBUs of the
Plaza ID