Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210 Revision C Page 106 of 288
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Traffic Management Programming (TMP)
Enable TMP
From the Tag
Programming tab on
the Configuration page:
Enable the Enable TMP
checkbox
anyone
TMP___
Enable
Enable
Disable
Enable means write a
timestamp and Reader ID
in transponder memory.
Disabled means the
reader does not update
those fields.
N/A
Reader ID
From the Tag
Programming tab on
the Configuration page:
Enable or disable the
Reader ID checkbox
anyone
rw_RID
Enable
Enable
Disable
Determines whether or
not to program the TM-
DATA reader ID field of
the tag's R/W area
N/A
Reader ID
From the Tag
Programming tab on
the Configuration page:
Enter a value in the
Reader ID field.
Note: Make sure a
unique Reader ID is
used when there are
multiple readers at a
plaza.
anyone
RID___
0
min: 0
max: 4095
Use to enter a value which
is written into the
transponder if either
Traffic Management or
Cross Reader Algorithm
(Classic) is enabled.
N/A