Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210 Revision C Page 107 of 288
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
TM Date/Time
From the Tag
Programming tab on
the Configuration page:
Either enable or disable
the TMP checkbox.
anyone
rwTMDT
Enabled
Disabled
Enabled
Determines whether or
not to program the TM-
DATA date/time fields of
the tag's R/W area
N/A
TM Date/Time
From the Tag
Programming tab on
the Configuration page:
With TMP enabled,
select TM Date/Time.
anyone
TMDTTM
Disabled
DisabledEnabled
Disabled: the Reader date
and time is not written to
OBUs
Enabled: the Reader date
and time is written to
OBUs
to keep a record
in OBUs of the
TM transaction
time
Toll Collection Programming (TCP)
Enable TCP
From the Tag
Programming tab on
the Configuration page:
With the Read-Only
Mode check box
cleared, select the
Enable TCP check box.
anyone
TCP___
1 (Enabled)
0 (Disabled)
1 (Enabled)
Disabled: Reader is not
permitted to update toll
collection fields in OBUs
Enabled: Reader is
permitted to update toll
collection fields in OBUs
to control if toll
collection fields
can be written to
OBUs and to
access TCP
settings in the
Tag
Programming
tab