Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210 Revision C Page 121 of 288
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Enforce Adjustment
ID Checking
From the Toll
Rate/Balance tab on
the Configuration page:
select the Enforce
Adjustment ID Checking
check box
click the Update TRBA
Configuration button
anyone
TRBEAI
Disabled)
Disabled)
1 (Enabled)
Disabled: no limits on
how often Reader can
update OBU balance
Enabled: limits how often
Reader can update OBU
balance
to set limits on
how frequently
the balance
stored in a
toll/balance OBU
can be updated.
Channel tab
TDM Enable
From the Channel tab
on the Configuration
page:
Select the TDM Enable
checkbox.
anyone
TDMEBL
Disabled)
Disabled)
1 (Enabled)
Disabled: TDM selections
not available to configure.
Enabled: TDM selections
available for
configuration.
Enables TDM RF
scanning.
Note: At least
one of 'TDM
Enable' or 'FDM
Enable’ must be
enabled at all
times.