Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210 Revision C Page 124 of 288
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
FDM Frequency
(MHz)
From the Channel tab
on the Configuration
page:
Select one of the
choices offered from
the drop down menu
for every appropriate
channel.
anyone
FDMFRQ
0
0-27
FDM tag protocol frequency.
Note: Some bands are restricted
based on protocol.
902.50 915.75
903.00 916.00
903.50 916.50
910.00 917.00
910.50 917.50
911.00 918.00
911.50 918.50
912.00 919.00
912.50 919.50
913.00 920.00
913.50 920.50
914.00 921.00
914.50 921.50
915.00
915.50
Used for ATA,
6B, 6C, Sego
protocols