Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210 Revision C Page 127 of 288
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Group ID
From the Channel tab
on the Configuration
page:
Type the Group ID in
the appropriate fields.
user with
Advanced
User
permission
s
RFGPID
0
0-7
By default all channels are
in one group, such that
any cross lane reads
within the group
generate only one
transaction. By
specifying different
group IDs, multiple
independent coverage
zones can be created.
This is useful for certain
applications.
Used by all
protocols
LPT/FME Voting
time [ms]
From the Channel tab
on the Configuration
page:
Type the voting time in
the appropriate fields.
user with
Advanced
User
permission
s
LPTVTO
300
0-9999
Specify the time after the
initial entry of the
transponder into the
capture zone after
which a report is
generated. This is a
trade-off between lane
assignments versus
latency. A value of 0
means no voting,
subject to the
Programming Timeout
parameter. Specific to
[L]icense [P]late [T]ags
only.
Used by all
protocols