Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210 Revision C Page 130 of 288
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Dynamic Voting
Capture Zone Span
Multiplier
From the Channel tab
on the Configuration
page:
With Dynamic Voting
Control set to Reader,
enter a voting time
multiplier in the
Dynamic Voting
Capture Zone Span
Multiplier field.
user with
Advanced
User
permissions
DVCZTM
2
1-5
sets the Capture Zone
Span Time multiplier
to determine
how long an
OBU has to be
out of a capture
zone before re-
entry is
considered a
new transaction.
This number is a
multiple of the
Average Voting
time
LC tab
Allow Remote LC
Configuration
From the LC tab on the
Configuration page:
Select the Allow
Remote LC
Configuration check
box.
user with
Advanced
User
permissions
RMOTLC
1 (Enabled)
Disabled)
1 (Enabled)
Disabled: LC is not
permitted to Configure
Reader
Enabled: allows the LC to
configure the Reader
remotely
allows changes
to the Reader
configuration
from the LC