Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210 Revision C Page 132 of 288
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Send Heartbeat
Messages
From the LC tab on the
Configuration page:
Select the Send
Heartbeat Messages
check box.
anyone
LCHTBT
1 (Enabled)
Disabled)
1 (Enabled)
Disabled: No heartbeat
messages are sent to LC.
Enabled: causes the
Reader to send heartbeat
messages to the LC via
serial link
to detect
communication
problems
between the
Reader and the
LC in the
absence of OBU
data
Heartbeat Interval
From the LC tab on the
Configuration page:
With heartbeat
messages enabled,
enter a time, in
seconds, in the
Heartbeat Interval
check box.
anyone
LCHBTM
2
1-30
sets the heartbeat
message interval
to configure how
often heartbeat
messages are
sent from the
Reader to the LC
Use RFP-Compliant
Message Format
From the LC tab on the
Configuration page:
Select the Use RFP-
Compliant Message
Format check box.
user with
Advanced
User
permissions
RfpMsg
Disabled
Disabled
Enabled
enables the RFP-
compliant message
format
allows the
Reader to report
transactions to
the LC in the
new E-ZPass-
specified format