Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210 Revision C Page 148 of 288
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Destination IP/Port
From the Ethernet
Logging tab on the Log
Files page:
Enter the IP address and
port number of the
computer to receive log
files, then, click the
Update Ethernet
Logging Configuration
button.
user with
View Log
Files and
Manage Log
Files
permissions
ELDTIP
0.0.0.0.0
N/A
provides the IP address
and port of the computer
to receive log files
to allow the
Reader to know
the IP address of
a remote
computer so log
files can be sent
Ethernet Protocol
From the Ethernet
Logging tab on the Log
Files page:
Select either TCP or
UDP, then, click the
Update Ethernet
Logging Configuration
button.
user with
View Log
Files and
Manage Log
Files
permissions
ELPROT
TCP
TCP
UDP
TCP: use TCP protocol for
sending log files via
Ethernet
UDP: use UDP protocol for
sending log files via
Ethernet
to choose an
Ethernet
protocol that
focuses on speed
(UDP) or quality
of data (TCP)