Operations and Maintenance Manual

ManualsBrandsKAPSCH TRAFFICCOM CANADA ManualsElectronicsNon-multilateral LMS transmitter and receiver

191

192

193

194

195

196

197

198

199

200

JANUS

Multi-Protocol Reader Ver. 2: Maintenance Instructions

Confidential UM 360450-210 Revision C Page 194 of 288

These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict

confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or

used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.

FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42

Kapsch TrafficCom

3. Select Disabled from the drop-down menu in the Dynamic Voting Control row .

4. Enter a voting time, in milliseconds, in the LPT/FME Voting Time field to set the voting time for LPT and

FME OBUs.

5. Enter a voting time, in milliseconds, in the Voting Time (all other tags) field to set the voting time for all

OBUs that are not LPT or FME.

6. If a voting time of 0 was entered in step 4 and step 5 and Dynamic Voting Control is disabled

(effectively disabling voting), click on the Group tab.

Result: The following screen appears.

7. Enter a time, in seconds (s), in the Transponder Timeout field