Operations and Maintenance Manual

ManualsBrandsKAPSCH TRAFFICCOM CANADA ManualsElectronicsNon-multilateral LMS transmitter and receiver

221

222

223

224

225

226

227

228

229

230

JANUS

Multi-Protocol Reader Ver. 2: Appendix

Confidential UM 360450-210 Revision C Page 226 of 288

These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict

confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or

used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.

FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42

Kapsch TrafficCom

3. Set the TDM and FDM RF State of the MRFM-S connected to the antenna to Offline.

4. Remove the antenna.

Installing an antenna

1. Install the antenna (see Installing an Antenna, page 169).

2. Select the Configuration link on the left side panel of the CTM web interface.

3. Click the Channel tab.

Result: The following screen appears.