Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Appendix
Confidential UM 360450-210 Revision C Page 237 of 288
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict
confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or
used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42
Kapsch TrafficCom
3. Click the Reboot button
Configuring events that cause a switchover
Redundant Readers need to be configured in order to:
 Determine whether the Reader switches over when there is a failure
 Determine what failures cause a switchover
 Determine if the Reader switches back to the primary side once a failure has cleared.
Prerequisites: The primary and secondary sides are both powered up. You must have Advanced User
permissions to configure redundancy settings in the browser interface.