Operations and Maintenance Manual

ManualsBrandsKAPSCH TRAFFICCOM CANADA ManualsElectronicsNon-multilateral LMS transmitter and receiver

JANUS

Multi-Protocol Reader Ver. 2: Operating Instructions

Confidential UM 360450-210 Revision: C Page 48 of 288

These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict

confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or

used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.

FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX08/17/2015 11:42

Kapsch TrafficCom

Note: You can use a recent versions any popular browser.

ATTENTION: When using certain versions of Internet Explorer, you may experience

missing strings of text when a CTM screen displays. Press control and F5 (Ctrl F5)

simultaneously. This action clears the buffer and refreshes the screen.

Note: The default IP address of the primary and secondary CTM ETHERNET 1 port is 192.168.1.50. The IP

address may change during installation.

2. Consult the record of system IP addresses maintained by the system integrator to determine the correct

IP address by using the hypertrm command. See Using HyperTerminal to connect to the DIAGNOSTIC

PORT on page 255.

Note: The default IP addresses of the primary and secondary CTM ETHERNET 2 port are 192.168.0.50 and

192.168.0.51 respectively. The IP addresses may change during installation.

3. Consult the record of system IP addresses to determine the correct IP address by using the hypertrm

command. See Using HyperTerminal to connect to the DIAGNOSTIC PORT on page 255.

4. In the address bar of the web browser, type: https:// followed by the IP address of the ETHERNET 1 Port

or USB Adapter.

5. Use the following decision table to continue the procedure.

IF …

THEN …

you click the Login button and a dialog box requesting

a username and password appears,

go to step 6.

a 403 Forbidden error message appears,

ensure the IP address entered in the address bar is

correct and that the IP address is preceded by https://

a web browser message indicating there is a

connection problem appears,

confirm that the IP address entered in step 2 is the

correct record of system IP addresses.

a security warning appears

follow the instructions the web browser provides.

Note: Usernames and passwords are case-sensitive.

6. Enter your username and password.

Result: The following Home page appears.