Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210 Revision: C Page 60 of 288
© Kapsch TrafficCom Canada Inc. 2015
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict
confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or
used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX08/17/2015 11:42
Kapsch TrafficCom
Miscellaneous Information tab
Field
Status
Description
Front-panel switch
position
Auto; Primary;
Secondary
Auto, Primary (switch set to Primary side), Secondary
(switch set to Secondary side).
For a redundant system, the switch would normally be set
to Auto
CFM Status
Present
Indicates normal status
Not Detected
Indicates a problem; call Kapsch Service
Lane Tuning Mode
Disabled
‘Disabled’ is normal status
Enabled
“Enabled” is not normal status
Super Frame Time (μs)
Numerical read
Reader timing information In microseconds
RF Channel Statistics
The Statistics page displays performance information for each MRFM-S channel. The statistics
displayed do not update automatically as transactions occur. Update the statistics with the latest data
by navigating away from, and then returning to the Statistics page, or by refreshing/reloading your
browser window.
Updates to the statistics pages commence when the Reader begins processing OBU transactions after
startup.
Statistics continue being appended until the system is either stopped and re-started, rebooted, or the
Reset Transaction Statistics button is clicked, which sets the statistics values to zero and updates
commence again.
Reports by channel
This screen lists and graphs reports on channel activity. You can chose to display daily or weekly
reports by clicking the available buttons.