Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210 Revision C Page 85 of 288
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
IP Address
From the General tab
on the Configuration
page:
Type an IP address in IP
Address .
user with
Advanced
User
permissions
SCNDIP
192.168.0.51
N/A
sets a unique IP address
to the secondary side of
the reader.
Assigns a unique
IPv4 address
(e.g.
192.168.0.51) to
the secondary
side of the
reader. Note:
This address
should be
provided by the
SI network
planner.
Reader IP address
From the General tab
on the Configuration
page:
Type a Reader IP
address in Reader IP
Address field
user with
Advanced
User
permissions
READIP
10.0.0.50.0
N/A
sets the IP address for the
Reader
Used to specify a
unique IP
address for the
Reader when
configuring an IR
network