Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210 Revision C Page 89 of 288
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Type Of Reader
Syncing To
From the General tab
on the Configuration
page:
Select either JANUS or
Badger from the drop-
down box
anyone
SYNCTO
(JANUS)
(JANUS)
(Badger)
JANUS: normal frame rate
is used for
synchronization
Badger: Reader
synchronization is
adjusted to Badger frame
rate
Used to cause
JANUS
®
Readers
to adjust to the
same frame rate
as BADGER
Readers
Note: Badger to
Janus sync
supported:
8-channel
Badger with 8-
channel Janus
Report Latency by Tag Type
0 - Interior FPT
Delay [ms]
From the General tab
on the Configuration
page:
Enter a time (in
milliseconds) in the 0-
Interior FPT Delay field
user with
Advanced
User
permissions
LYCTL0
0
0-5000
sets report delay time in
milliseconds for Interior
FTP OBUs (Type 0)
Used to slow
down the
transaction
report of Type 0
OBUs to the LC
for those legacy
sites where the
LC is expecting
BADGER Reader
timing