Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210 Revision C Page 92 of 288
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
5 - OBU Feedback
Tag Delay [ms]
From the General tab
on the Configuration
page:
Enter a time (in
milliseconds) in the
OBU Feedback Tag
Delay field..
user with
Advanced
User
permissions
LYCTL5
0
0-5000
sets report delay time in
milliseconds for CVO
OBUs (Type 5).
Used to slow
down the
transaction
report of Type 5
OBUs to the LC
for those legacy
sites where the
LC is expecting
BADGER Reader
timing
6 - HOT Tag Delay
[ms]
From the General tab
on the Configuration
page:
Enter a time (in
milliseconds) in the HOT
Tag Delay field..
user with
Advanced
User
permissions
LYCTL6
0
0-5000
sets report delay time in
milliseconds for CVO
OBUs (Type 6).
Used to slow
down the
transaction
report of Type 6
OBUs to the LC
for those legacy
sites where the
LC is expecting
BADGER Reader
timing