Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360450-210 Revision C Page 96 of 288
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 REV C JANUS MPR2 OPERATOR-MAINTENANCE MANUAL.DOCX 08/17/2015 11:42
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Database
(Summary)
Retention period
[7–90 days]
From the General tab
on the Configuration
page:
Enter the appropriate
quantity in the
Database (Summary)
Retention period [7–90
days] field
user with
Advanced
User
permissions
SDSRET
30
min: 7
max: 90
Use to specify how many
days transaction summary
data is retained.
N/A
Database
(Summary) Interval
[1–30 minutes]
From the General tab
on the Configuration
page:
Enter the appropriate
quantity in the
Database (Summary)
Interval [1–30 minutes]
field
user with
Advanced
User
permissions
SDSINT
15
min: 1
max: 30
Generates transaction
summary records into
database at specified time
interval. Values below 5
minutes for testing only.
May be automatically
adjusted by reader based
on load and retention
period
Generates
transaction
summary records
into database at
specified time
interval