User's Manual

Installation Page 11 of 15
1000005542-Bed-02
Installation
Adjust the lug of WAVE-UNIT in the appropriate slot the PDA and press the
WAVE module down until it locks with the PDA. Check for correct fit.
Press the button on the WAVE-UNIT and pull the WAVE-UNIT off.
The PDA can be charged without removing the WAVE-UNIT module. Plug in
cable in jack on the side of the WAVE-UNIT.
Warning: The WAVE-UNIT does not include any charging control
mechanisms for the PDA. To prevent damage to the device or injury to
humans contact the PDA manufacture for detailed instructions about
charging.
Mount the WAVE unit
Remove the WAVE unit
Charging