User's Manual

User Manual | SRU-8X1X RFID Reader 18000-63
Doc No. 47000001740
|
Version 01
|
2018-12-11
|
released
Page 23 of 105
Confidential
NOTICE
Risk of material damage due to the screws screwed into the reader housing too deep!
If the screws are screwed into the reader housing deeper than 10 mm, the housing is no
longer water proof.
Ź When mounting the reader, make sure that the screws are screwed into the unit housing
no deeper than 10 mm.
Installing the Reader
At the rear panel, the reader has threaded holes.
Ź See the drawing below for the dimensions of the holes.
Figure 4: Dimensions, rear view
10.2.1 Wall Mounting
Recommended for SRU-8110, since no alignment is necessary.
10.2.2 Wall/Pole Mounting
Recommended for SRU-8211readers, because the alignment of the reader antenna unit is necessary.