User's Manual
Page 32 of 105
User Manual | SRU-8X1X RFID Reader 18000-63
Doc No. 47000001740
|
Version 01
|
2018-12-11
|
released
Confidential
13 2SHUDWLQJ5HDGHU6WDUW6RIWZDUH
The reader can be operated using the ReaderStart software. The software provides all the necessary
functionality of the reader for a test in a real environment. As an aid to configuration, various basic settings
for application scenarios are available.
Ź For the current version of the ReaderStart, go to our support portal at
https://www.kapsch.net/ktc/Portfolio/Products
System Requirements
To ensure correct operation using the software on your PC/laptop, your PC/laptop should meet the following
minimum requirements:
Processor: X86-compatible
Memory: 512 MB RAM
Operating system: Windows XP (SP3), Vista (SP1), Windows 7 or higher
Free hard disk memory for:
- 32-bit operating system: 850 MB (including Microsoft .Net Framework 4)
- 64-bit operating system: 2 GB (including Microsoft .Net Framework 4)
Installing the Software
Tipp
The setup and the ReaderStart software might look different, depending on the operating
system and the software version. The following images show the installation of the
ReaderStart V3.
During the installation, it is checked whether the necessary requirements for the installation
are met, i.e. whether all the dependencies, such as the necessary Windows Service Packs,
the .NET Framework in the respective version together with the C++ redistributables are
installed. If this is the case, the software and the DLL for controlling the reader are installed.
1. Download the ReaderStart software at
https://www.kapsch.net/ktc/Portfolio/Products
2. Extract the downloaded zip file.
3. Double-click on the
ReaderStart_v3_Setup.exe file.
ۆ The following screen with the option to select
the language used during the installation appears.
4. Select a language between German and
English
5. Click OK to confirm the selection