User's Manual

User Manual | SRU-8X1X RFID Reader 18000-63
Doc No. 47000001740
|
Version 01
|
2018-12-11
|
released
Page 37 of 105
Confidential
Figure 12 Establishing connection to the reader: search for readers
The following steps describe
establishing the connection for
readers with an IP address.
3. In the Ethernet block, click Search for
Readers (ᬇ in Figure 11).
ۆ The screen on the left appears.
4. Select a reader under Readers with IP
Address (ᬉ in the figure on the left).
5. If there have been 2 or more DHCP requests
sent by the reader, the Readers without IP
Address (DHCP) field (ᬊ) is expanded.
Then it is possible to assign the IP address to
the reader.
ۆ The view on the screen changes. The selected
reader has a grey background (ᬅ in the figure
on the left) and on the right (ᬆ), the
properties of the reader are shown.
6. To close this pop-up screen, click Apply
(ᬇ) or on the arrow (ᬈ).