User's Manual

Page 40 of 105 User Manual | SRU-8X1X RFID Reader 18000-63
Doc No. 47000001740
|
Version 01
|
2018-12-11
|
released
Confidential
 Status Field
Tipp
The contents of the tabs are considerably large and are, therefore, described in a separate
chapter; see 14 Operating the Reader Using the ReaderStart Software
13.4.1 Menu Bar
By means of the menu bar, it is possible to customize the program to the user's requirements.
13.4.1.1 File
Figure 14 Menu bar: file
ᬅ
Save reader configuration to file saves reader configuration in an XML file
ᬆ
Load reader configuration from file loads reader configuration from a previously saved XML file
ᬇ
Close closes File
13.4.1.2 Saving Reader Configuration to File
There is a wide variety of parameters available for configuring the RF front end. It is possible to save the
complete setting as a parameter set in an XML file under File Ź Save reader configuration to file and to load
it later.
Ź Under File, click Save reader configuration to file.
ۆ The following window appears: