User's Manual

User Manual | SRU-8X1X RFID Reader 18000-63
Doc No. 47000001740
|
Version 01
|
2018-12-11
|
released
Page 43 of 105
Confidential
13.4.1.3 Loading Reader Configuration from File
Ź Under File, click Load reader configuration from file.
ۆ The following window appears:
Figure 16 File: load reader configuration from file
ᬅ
File
opens a dialogue to select the configuration file To load reader configuration to
file:
1. Click File (ᬈ in Figure 16).
ۆ A dialogue appears.
2. Select the directory and the configuration file from which the parameter
sets will be loaded.
3. Click Open.
ۆ The parameter sets saved in the configuration file are loaded and are
marked
with a red tick.
ۆ The progress bar (ᬉ) shows the progress of the save operation.
ᬆ
Parameter set see Parameter set
ᬇ
All see AllAllAllAllAllAllAll
ᬈ
None see None
ᬉ
Progress shows the progress of the load operation by means of the progress bar
ᬊ
Status shows the status of the SetParameterByConfigID parameter
ᬋ
Error shows errors in the SetParameterByConfigID parameter