User's Manual

User Manual | SRU-8X1X RFID Reader 18000-63
Doc No. 47000001740
|
Version 01
|
2018-12-11
|
released
Page 57 of 105
Confidential
14.1.1 Ethernet Section
The Ethernet connection is established by linking the reader into an existing network or by directly
connecting the reader and the control computer. To directly connect the reader to the PC, a cross-link cable
is required, unless the LAN inter- face on the PC supports auto-mdi-x. Alternatively, it is possible to use two
standard patch cables and a switch.
Figure 24 Ethernet section
14.1.1.1 Establishing a Secure Connection
ᅚ The connection to the reader has not yet been established.
1. In the Ethernet section, click the box next to the lock symbol (ᬅ in Figure 24).
2. Click Search for Readers (ᬆ) or Connect (ᬇ).
ۆ The following pop-up window appears:
3. Type in the user name at User (ᬅ). The default user name is root.
4. Enter the default password UHF-RFID-Dev at Password (ᬆ).
Tipp
You can change the password under Linux module ڼ Connection config; see 13.4.1.9 Linux
Module
5. If you want to use the key file instead, click the box at Key file (ᬇ).
ۆ A pop-up window to select the key file opens.
6. Select the key file.
7. Click OK to establish the secure connection.
ۆ It is possible to configure the secure connection under Linux module ŹConnection config; see also
13.4.1.9
Linux Module