User's Manual

Page 76 of 105 User Manual | SRU-8X1X RFID Reader 18000-63
Doc No. 47000001740
|
Version 01
|
2018-12-11
|
released
Confidential
ᬏ
GSM status shows the GSM status
• flashing: trying to connect permanently lit connected
• off: Wi-Fi disabled
ᬐ
Bluetooth status shows the Bluetooth status
• flashing: trying to connect
• permanently lit: connected
• off: Wi-Fi disabled

Ethernet link
status
shows the Ethernet connection status
RSSI LED Bar (received signal strength indicator)
This menu is used to determine the strength of the received signal.
Figure 39 RSSI LED Bar
ᬅ
Refresh updates the number of detected tags
ᬆ
selects a tag from the number of the detected tags by means of the drop-down menu
ᬇ
All/Antenna
1–4
selects whether the tag has to be read on all antennas or only one antenna
ᬈ
Start LED
bar
measures the signal strength
ᬉ
Stop LED
bar
stops the measurement
ᬊ
RSSI, Min.
RSSI, Max.
RSSI
shows the current RSSI value as well as the minimum and the maximum RSSI values
ᬋ
shows the read range by means of the colored bars
green signal strength is high (high RSSI value)
yellow signal strength is medium (medium RSSI value)
red signal strength is low (low RSSI value)
ᬌ
Details shows detail information about RSSI for each antenna and property